1lt Acrylic Primer is a ready to use primer for use on porous and difficult substrates prior to tiling or screeding, or to seal gypsum plasters or screeds prior to the addition of cement based adhesives. It can be used neat when sealing substrates or diluted with an equal quantity of water for general priming. Acrylic Primer should be used to prime all dense and porous surfaces prior to application of any of the range of Larsen Tile Adhesives or the range of Larsen Flooring products. On porous surfaces where the requirement is not to seal the surface, dilute Acrylic Primer 1:1 with clean water and apply adhesive/screed, etc. while primer is still tacky. (Do not allow to dry.) Particularly porous substrates may require a second coat applied after the first has been allowed to dry. When using Acrylic Primer to seal surfaces, e.g. Gypsum plaster, apply the first coat diluted 1:1 with water and allow to dry, before applying a second coat neat to the surface (do not allow neat primer to pond). 2 or more coats of neat primer may be required. Subsequent products should be applied when the Acrylic primer has dried clear but remains tacky, this is typically within 1 – 2 hours after. Normal practice when applying 2 coats would be to apply the first coat in the evening and the second coat on the following morning prior to tiling or screeding.
- 1 Litre
- Brush or Roller
- Surface Prep
- larsen
How To Tips
If you are thinking about tiling walls and floors and you are unsure about how to fix the tiles, underfloor heating, or even tile maintenance once your tiles have been laid, than using the How-To-Tips will be a good starting point. The How-To-Tips are a step by step guide ensuring that what ever tiling job that you undertake, you do the best job possible.
