Free advice about Floor Heating from Tile Choice, West Midlands

FREEPHONE 0800 1 560 560

How to floor tile with Tile Choice West Midlands

Paint the floor using the Thermal Primer to ensure a dust free, tacky base for the tape. The primer also helps increase the effectiveness of the tile adhesive and promotes lateral heat transfer, effectively removing cold spots.

The floor should then be marked for the position of the heater. Warm-up's installation manual includes a guide to assist you in spacing the wire depending on the size and layout of the room.

Lay out the wire and hold in place with fixing tape. Once the heater has been layed out and the wire spacings finalised, cover the entire wire with the tape, this will protect the wire during the tile fixing process.

Connect the floor probe thermostat. Once the thermostat is connected the heater can be switched on to ensure that it is working prior to the tiles being fixed.

Using a Flexible floor tile adhesive and a flexible grout, the floor tiles are fixed and grouted in the normal manner.